Infinitely adjustable folding mirror in length and angle, universally suitable for most motorcycle models.- Suitable for left and right- With ECE approval mark!Scope of delivery: - 1 mirror- Mounting adapter:1x M8 x 1.25 with right-hand thread1x M8 x 1.25 with left-hand thread1x M10 x 1.25 with right-hand thread1x M10 x 1.25 with left-hand threadFor BMW R1200GS/ R1200GS Adventure/F850GS/ F750GS/ F800GS/ F700GS/ F650GS(Twin)/ HP2/ R1250GS/ R1250GS Adventure and Triumph Tiger 1050, the adapter M10x1.5 (01-040-0761-0) is required!

The tank/airbox cover in carbon for the BMW F 700 GS (2013-2016) / F 800 GS (2013-2016) / F 800 GS Adventure (2013-2016) significantly enhances the sporty appearance of the motorcycle. The carbon part replaces the original plastic part and is screwed onto the standard mounting points. This product replaces the original component using the original mounting points. The focus is on weight savings (typically a reduction of about 70% compared to the original component) and increased stiffness. The carbon part has been completely manufactured from prepreg material (see FAQ) according to the latest guidelines in an autoclave and, as is customary with us, is coated with a clear plastic layer for protection against environmental influences in the next step.This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The front fender in carbon for the BMW F 800 GS (2013-current) / F 800 GS Adventure (2013-current) replaces the original part using the original mounting points. The focus is on weight savings (typically a reduction of about 70% compared to the original part) and increased stiffness. The carbon part has been completely manufactured in the autoclave according to the latest guidelines from prepreg (see FAQ) material and, as is customary with us, has been coated with a clear plastic layer in the next step to protect against environmental influences. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The rear wheel cover for the BMW F 700 GS (2013-current) / F 800 GS (2013-current) / F 800 GS Adventure (2013-current) has been designed to include the original chain guard. The length of the rear wheel cover has been chosen to not only improve the cleanliness of the motorcycle but also to relieve your shock absorber from stone impacts, dirt, and "sandblasting." Specifically, the lifespan of the seals and piston rod of the shock absorber is significantly increased by the installation of an efficient rear wheel cover. The special design of the rear wheel cover significantly reduces the contamination of the motorcycle from the rear wheel. The shape of the cover is model-specific, taking into account standard chassis or tire variants. The carbon part has been completely manufactured from prepreg material (see FAQ) according to the latest guidelines in an autoclave and, as is customary with us, coated with a clear plastic layer for protection against environmental influences. This plastic coating greatly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

Original BMW Spare Part Additional Information The part with the BMW part number 46 63 8 546 386 is used on the following vehicles:

The squeegee is ideal for applying stickers and films without scratching.Due to its soft material, you can apply pressure optimally on curves for secure fixing,ensuring a long durability of the stickers/film.

2 pcs. stickers, approximately 120x20mm Made from high-quality film, which is also used for traffic signs, for example. Solvent-free adhesive surface, suitable for all helmet types. A real safety plus for rides at dusk and in the dark. With transfer tape for precise positioning (can be applied wet or dry).

The beak/fender extension for the BMW F 800 GS (2013-present) / F 800 GS Adventure (2013-present) replaces the original component using the original mounting points. The focus is on weight savings (typically around 70% savings compared to the original part) and increased stiffness. The carbon part has been completely manufactured in the autoclave from prepreg material (see FAQ) according to the latest guidelines and, as is customary for us, has been coated with a clear plastic layer for protection against environmental influences in the next step. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly. The beak/fender extension fits the F 800 GS Adventure models, as well as the F 800 GS from the year 2013 onwards.

The mounting adapter for the folding mirror 040-0760 is required for:BMW R1200GS/ R1200GS Adventure/F900GS/F850GS/ F750GS/ F800GS/ F700GS/ F650GS(Twin)/ HP2/ R1250GS/ R1250GS Adventure and Triumph Tiger 1050Scope of delivery:1 piece

Color: Black Weight: approx. 0.5 kg The small engine guard harmoniously integrates into the sporty concept of the F 650 GS It offers optimal protection for the engine against stone impacts during light off-road use Also in combination with the engine protection bar Installation instructions included Standard on the F 800 GS Scope of delivery: Installation instructions included Without mounting parts! Material: A mixture of polypropylene, EPDM (ethylene-propylene-diene rubber), and talc.

Color: Black Dimensions: The splash guard extension extends approximately 20 cm beyond the lower end (tip) of the license plate holder Width: With a width of 195 mm, the splash guard extension completely covers the tire width Weight: approx. 0.6 kg Effective protection of the vehicle's rear from dirt splashes, especially on wet and dirty roads Mounting: bolted, to the rear wheel cover and license plate holder Scope of delivery: Splash guard extension; reinforcement plates left and right; mounting materials; installation instructions Material: Polyamide PA6, textured

For more wind and weather protection, the touring windscreen is available Color: Clear. Both sides have a scratch-resistant coating for lasting transparency and a consistently high-quality appearance. Material: Polycarbonate

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

The Safety rearview mirror is the ideal motorcycle mirror for your adventure bike. It fits any motorcycle with a M10 x 1.5 right-hand thread mirror mount. The mirror not only looks great, but it is also made of high-quality and extremely durable plastic.Thanks to the aspherical part, the visible area is enlarged - thus the "blind spot" is a thing of the past. The ball joint allows for easy adjustment of the rearview mirror. A sensible safety feature - for city traffic, country roads, and highways! Sold as a set for the left and right side.With ECE approval mark!Dimensions:Overall approx. (hxb) 160 x 260 mmGlass approx. (hxb) 82 x 140 mm

Contour cutTIP: Can be universally mounted on aluminum cases! For example, on the original aluminum cases of the BMW R1200GS-ADV or BMW F800GS.Size: 10.5 x 3 cm

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Many riders of the new BMW will wish for more wind protection, as the original windscreen is designed to be very sporty. We address this with the tall screen!The Touratech windscreen is significantly larger and has a modified aerodynamic shape. The improved wind protection reduces the (wind) pressure on the rider, allowing for a much more relaxed ride. Turbulence around the helmet is minimized, and weather protection is enhanced.The windscreen is simply replaced with the original counterpart. The attachment is done at the same points.- with TÜV certificate (ABE)- tintedBMW F800GS: for all model years!To mount the windscreen on the F700GS, you will need the original BMW adapter: 77 33 8 531 603