good protective effect in falls and crashes at low speed Indicators, clutch and brake levers, exhaust pipes, fairing parts, etc. are effectively protected high-quality powder coating including mounting materials  

Many riders of the new BMW will wish for more wind protection, as the original windscreen is designed to be very sporty.We address this with the high screen!The Touratech windscreen is significantly larger and has a modified aerodynamic shape. The improved wind protection reduces the (wind) pressure on the rider, allowing for a much more relaxed ride.Turbulence around the helmet is minimized, and weather protection is enhanced.The windscreen is simply replaced with the stock counterpart. The attachment is done at the same points.- with general operating permit (ABE)BMW F800GS: for all model years!For mounting the windscreen on the F700GS, you will need the original BMW adapter: 77 33 8 531 603

The squeegee is ideal for applying stickers and films without scratching.Due to its soft material, you can apply pressure optimally on curves for secure fixing,ensuring a long durability of the stickers/film.

Stable. Robust. Easy to use. The main stands from HEPCO&BECKER usually do not restrict lean angle while riding and are extremely durable. Thanks to sophisticated geometry and a non-slip footrest, it is very easy to securely park the motorcycle in any situation.The precisely manufactured stands are very stable, sandblasted, primed, and powder-coated in black, making them weather-resistant and durable.Main stands simplify maintenance tasks and provide a secure stand, for example, when refueling. During winter storage, they relieve the suspension elements and the rear wheel. ABE is included usually no restriction of lean angle high-quality surface finish Scope of delivery: main stand + mounting materials + instructions please refer to the attached installation instructions including helpful tool for hanging the tension spring

For frequently used motorcycle models in driving schools, ranging from 125cc to 750cc, we offer special crash bars for the front and rear that can be combined with our engine protection bars. good protection against falls and crashes at low speeds indicators, clutch and brake levers, exhaust pipes, fairing parts, etc. are effectively protected high-quality powder coating including mounting materials

When fully loaded or on uneven surfaces, the motorcycle is at risk of sinking slightly on the side stand.A precisely machined widening plate, which can be quickly screwed onto the side stand and eliminates this danger, is now available from us!The HEPCO&BECKER Side Stand Enlarger! partly more than double the contact area secure stand of the machine on all surfaces oxidation-resistant anodized aluminum and black-coated upper steel counterplate easy installation with just a few screws does not require ABE or registration

Center StandThe indestructible yet lightweight steel tube construction offers excellent lean angle and ground clearance, easy lifting, and a stable stand – whether for maintenance or on the go. The purchase of an additional assembly stand is usually no longer necessary. Ideal for the winter months: during longer periods of inactivity, the center stand relieves the tires.Secure stand during rides with heavy luggage and maintenance workModel-specific design for easy assembly and high lean angle clearanceEasy lifting of the motorcycleLever arms for optimal leverageBest corrosion resistance due to sandblasting before powder coating the surfaceMade of robust steelDelivery Contents1 x Center StandAssembly instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 2.3 kgApproval NoticeThe ABE certificate booklet delivered with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the assembly instructions. Registration in the vehicle documents is not necessary if the document is carried. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification regarding the approval of the product for motorcycle vehicle inspection outside of Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for the issuance of a necessary foreign certification.

Center StandThe indestructible yet lightweight steel tube construction offers excellent lean angle and ground clearance, easy lifting, and a stable stand – whether for maintenance or on the go. The purchase of an additional assembly stand is usually no longer necessary. Ideal for the winter months: during longer periods of inactivity, the center stand relieves the tires.Secure stand during rides with heavy luggage and maintenance workModel-specific design for easy assembly and high lean angle clearanceEasy lifting of the motorcycleLever arms for optimal leverageBest corrosion resistance due to sandblasting before powder coating the surfaceMade of robust steelDelivery Scope1 x Center StandAssembly instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal weight: Approx. 2.4 kgNoteOnly for models with original BMW lowering.Approval NoteThe ABE certificate booklet supplied with the product must always be carried while riding. This ABE is only valid for the listed models and under consideration of the information in the assembly instructions. Registration in the vehicle documents is not necessary if the document is carried. The scope of use in the ABE document is expanded annually. The current version of the ABE certificate is available in the download area of our webshop. Please note that clarification for the approval of the product for motorcycle vehicle inspection outside Germany must be resolved before purchase. Technical items that are rejected for registration in the respective country cannot be returned. Costs may arise for the issuance of a necessary foreign certification.

Crash BarsThe crash bars are offered in black with a weather-resistant and corrosion-resistant powder coating, tailored to the motorcycle model. The surface finishing is carried out in a state-of-the-art facility at the SW-MOTECH factory in Brno, Czech Republic.SW-MOTECH crash bars provide the necessary added safety for the tank, fairing, and components. The elements, specifically manufactured for the motorcycle type, seamlessly integrate into the vehicle's appearance while offering optimal lean angle freedom. Custom mounting elements allow for a robust and easy installation at the original mounting points.Construction from robust steelWeather-resistant and corrosion-resistant powder coating in blackReliable protection for important componentsExtremely stable construction matching the motorcycle's appearanceModel-specific development ensures precise fit and durable frame connectionOptimal lean angle freedom guaranteedEasy installation by bolting to factory-installed frame mounting pointsDelivery Scope2 x Crash BarsInstallation instructionsMounting materialsDetailsMaterial: SteelSurface: Powder-coatedColor: BlackTotal Weight: Approx. 6.1 kgApproval NoteThis product does not require approval. Therefore, it does not need any test marks, certificates, or general operating permits. The information in the installation instructions must be observed.

Crash bars are among the most important aftermarket parts that you should consider for your motorcycle!To protect the heart of your BMW, we use solid 25mm stainless steel tubing with a wall thickness of 25mm. Additionally, the sophisticated design of the mounting elements allows for easy and hassle-free installation of the one-piece bar at the designated mounting points provided by BMW.In the "event of a fall," energy is efficiently dissipated, and the forces acting on it are optimally distributed.The electropolished surface of the stainless steel is extremely resistant; even deep scratches lose their impact, and rust is a thing of the past.Together with the Touratech crash bar extension (048-51xx), it’s the perfect combination for a long and fulfilling motorcycle life!- compatible with the Touratech crash bar extension 048-51xx- easy and quick to install- made of black electropolished stainless steel- compatible with the original BMW engine guard "large aluminum"Note: BMW F800GS for all model years!

This is a new part offered Manufacturer: Touratech Condition: New Description: sold as shown Part Number: 01-055-1461-0 This luggage system solves all transport problems in one go!It has been specifically designed for mounting on almost any motorcycle and is intended for versatile applications. With easy assembly and disassembly, it is a brilliant alternative to the installation of a rigid and inflexible luggage system, even for medium-sized tours. The multifunctional base unit consists of a rear bag with a volume of approximately 28 liters. Two removable side bags with 7 liters each can be coupled and converted into a carrying bag using a strap included in the set. An additional small rear bag (01-055-1462-0) is available, which increases the maximum storage space to a total of 53 liters! Features:-easy mounting of the passenger bag with the help of the included mounting kit-the holding straps are slip-resistant and ensure a secure hold of the bag-two removable side bags with water-repellent two-way zippers-side bags can be converted into a carrying bag using the strap included in the set.-all bags can be optionally upgraded with waterproof inner pockets-soft, non-slip underside of the bags to prevent paint damage and ensure a secure hold-main bag with a sturdy plastic carrying handle for easy transport even when loaded-with two included carrying straps, it can be used as a backpack or shoulder bag-mesh inner pocket with zipper on the lid of the main compartment-reinforcements in the side parts ensure a stable shape even when partially loaded-these reinforcements can be easily removed with zippers, e.g., for washing the bag -the hidden inner pockets of the side wall reinforcements can also be used as a "secret compartment" for important documents.-easy access to the main compartment via a large lid flap with water-repellent two-way zipper-the volume of the bag can be further increased by simply opening two expansion zippers-increased visibility through reflective inserts-a reflective elastic band attached to the top allows for easy storage of small items like gloves during a quick stop-an additional bag for attachment "on top" is optionally available (01-055-1462-0)-this is simply attached over four snap fasteners on the top of the large bag -made from high-strength, Teflon-coated 1100 Dtex Cordura with an elaborately embroidered Touratech logoMounting:The mounting kit is attached to the seat with the help of three sturdy and elastic bands and is secured under the seat with strong Velcro fasteners. The Velcro strips used are delivered in excess length and can be shortened as needed by simply cutting them. The mounting of the passenger bag on the mounting kit is done on the left and right with strong zippers and is additionally secured by a central Velcro strip. Additionally, two holding eyes attached to the front and the included straps allow for additional tensioning of the bag forward and backward. The attachment of the side, removable bags is done through sturdy zippers, and two included adjustable tension straps allow for additional securing of luggage on the top of the bag. These tension straps are simply clicked into the plastic snap fasteners at the front and back of the bag.Whether on your own motorcycle for a short trip to the lake or a rental motorcycle in foreign countries:Your luggage is always securely stowed, no matter how much or how little it is!The passenger bag "Travel Bag" is the ultimate solution for your adventure! Scope of delivery:-Rear bag (22/28 liters)-Side bags left and right (2 x 7 liters)-two adjustable backpack straps-two adjustable tension straps with snap fasteners-three additional fastening straps for tensioning forward and backwardAccessories:-Set of waterproof inner bags 01-055-1463-0 (consisting of one waterproof welded inner bag for the main compartment and for the side bags left and right)-Rear bag "Add Bag" (01-055-1462-0) to expand the passenger bag "Travel Bag" -Mounting kit for attaching the "Add Bag" extension as a tank bag (01-655-1000-0)-Waterproof inner bag 01-055-1465-0 for the "Add Bag" extension bag Made of Teflon-coated CORDURA, making it water-repellent and dirt-resistant.Attention: Please use a paint protection film if necessary! (Item number 01-101-0100-0)Please refer to the vehicle list under "Additional Information".Made in Germany by KAHEDO!Color: black/grayDimensions (L x W x H): approx. 47 x 62 x 22 cmVolume: approx. 42 liters also suitable for: Kawasaki KLR650, Kawasaki ZZR 1400, Ducati Hyperstrada Additional Information Item Number 1021-01-055-1461-0 Additional Information 1 Vehicle List Additional Information 2 Vehicle Photos Color black-gray Vehicle Manufacturer BMW, Ducati, Honda, Husqvarna, Kawasaki, KTM, Suzuki, Triumph, Yamaha Model 1190 Adventure, 1400GTR, Bandit 1250, Bandit 1250S, CBF1000, DL650, F650GS TWIN, F700GS, F800GS, F800GS Adventure, F800GT, F800R, F800ST, GSX1250FA, HP2, K1200S, K1300S, K1600GT, KLR650, LC8 950, LC8 990, Multistrada 1200, NC750S, NC750X, Nuda 900, R1100GS, R1150GS, R1200GS, R1200GS Adventure, R1200GS LC, R1200R, R1200RT, R850GS, Tiger Explorer, Tiger Sport, Tiger800XC, Tiger955, Versys1000, XL600V, XL650V, XL700V, XT1200Z, XT660Z Material Textile Waterproof splash Shipping Weight (kg) 1.6500

This touring screen features a spoiler at the end that can be manually adjusted to the desired position in seven stages. The airflow behind the spoiler reduces wind pressure on the rider while simultaneously minimizing turbulence. The Vario touring screen is available in clear and smoke gray.      

The X-creen screen consists of a base screen and the multi-adjustable X-creen spoiler. The delivery includes two joint versions: single joint "S" and double joint "D", which can be mounted optionally. The "S" variant is recommended for customers who are comfortable with the screen height and only want to adjust the spoiler angle. Customers who find the "S" variant too high or too low can use the "D" variant to adjust the height of the spoiler by 110mm, while also being able to adjust the spoiler angle independently of the height, as well as the distance to the base screen. This allows the X-Creen to be optimally adjusted to the individual needs of the rider.